Skip to main content
Schneider Electric LX4FL200

Schneider Electric LX4FL200 TeSys contactor coil, 200 V DC

MPN LX4FL200
Active

Schneider Electric TeSys LX4FL200, FK contactor coil, 200 V DC, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4FL200 specifications
ParameterValue
Control circuit typeDC low consumption
Main product or component typeContactor coil
Coil voltage200 V DC
Temp operating max55 °C
Temp operating min-5 °C
Operating time40...50 ms opening 60...70 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX4FL200 is a TeSys FK contactor coil designed for 200 V DC control circuits. It is a service part (category 18401) for replacing or populating the coil on a compatible TeSys contactor frame. Opening time is 40 to 50 ms; closing time is 60 to 70 ms — a consistent, narrow band that matters when sequencing contactors in a motor starter or transfer scheme.

Control voltage and dropout behaviour

Rated control circuit voltage is 200 V DC. The coil drops out between 0.2 and 0.35 Uc at 131 °F (55 °C), and operates reliably from 0.85 to 1.1 Uc at the same temperature. That means the dropout threshold is well below the nominal hold level, giving a clean break without chatter. The coil has no built-in suppressor module. If the control circuit drives inductive loads or long wiring runs, an external flyback diode or RC snubber across the coil terminals is needed to protect the DC supply and limit EMI.

MPN
LX4FL200