Skip to main content
Schneider Electric LX9FL929

Schneider LX9FL929 TeSys F Contactor Coil, 169-186 V DC

MPN LX9FL929
Active

Schneider Electric TeSys F series, LX9FL929, specific contactor coil, 169-186 V DC, low consumption.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FL929 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption DC low consumption
Main product or component typeSpecific contactor coil
Coil voltage169...186 V DC
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles5 Mcycles
Operating time60 ms opening 20 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX9FL929 is a specific replacement coil for TeSys F contactors, carrying a 169 to 186 V DC control circuit voltage. This is a low-consumption variant, meaning the hold-in power draw settles at 48 W at 68 °F (20 °C) after the inrush peak of 733 W at the same temperature. The coil is supplied without a built-in suppressor module, so you will need to fit an external RC snubber or free-wheeling diode across the terminals if the control circuit drives inductive loads that could cause back-EMF spikes.

Switching times and thermal budget

Opening time is rated at 60 ms, closing at 20 ms — fast enough for most motor-start and isolation sequences in a panel. Heat dissipation runs between 22.8 and 27.8 W, so factor that into the enclosure's thermal rise calculation; a densely packed cabinet may need forced ventilation or a larger panel to stay within the -5 to 55 °C ambient operating range.

MPN
LX9FL929