Skip to main content
Schneider Electric LX9FL938

LX9FL938 TeSys Contactor Coil, 440-460V AC/DC, 60ms Open

MPN LX9FL938
Active

Schneider Electric TeSys F series, LX9FL938 specific contactor coil, 440-460 V AC 40-400 Hz / DC low consumption, 60 ms opening 50 ms closing.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX9FL938 specifications
ParameterValue
Control circuit typeAC 40...400 Hz low consumption DC low consumption
Main product or component typeSpecific contactor coil
Coil voltage440...460 V DC 440...460 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles5 Mcycles
Operating time60 ms opening 50 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

Coil for the TeSys F line

The LX9FL938 is a specific contactor coil in the TeSys F range, designed to drive the main contactor armature. It accepts a control voltage of 440-460 V AC (40-400 Hz) or DC, with a low-consumption hold circuit that drops inrush from 830 VA to 47 VA once the contactor seals. Opening time is 60 ms, closing time 50 ms — fast enough for most motor-start and power-switching sequences in industrial panels. The coil carries no built-in suppressor module, so you'll want to add a flyback diode or RC snubber across the terminals if the control circuit drives inductive loads like a PLC output. The hold-in power consumption sits at 47 VA, and heat dissipation runs 22.8-27.8 W — factor that into your enclosure thermal budget if the panel is tight.

MPN
LX9FL938