Single-phase servo drive for 0.4 kW motion axes
The LXM16DU04M2X is a Schneider Electric motion servo drive from the Easy Lexium 16 series, designed for single-phase 200…240 V supplies. It delivers 0.4 kW nominal power at 220 V with an 8 kHz switching frequency, and its compact housing fits into tight panel layouts where three-phase power is unavailable.
Current ratings and peak capability
Continuous output current is 2.6 A, with a 3-second peak of 10 A at 220 V — enough to handle short-duration acceleration or load transients without tripping. The line-side draw is 4.5 A at 185.3 % of rated load under single-phase supply, which sets the upstream breaker and wiring sizing.
Supply and frequency conditioning
Supply frequency tolerance is 50/60 Hz ±5 %, and the drive accepts network frequencies from 47.5 to 63 Hz. Overvoltage category III means it is rated for fixed-installation mains with transient withstand typical of industrial distribution panels. Maximum leakage current is 3.5 mA — factor this into residual-current device selection.