Skip to main content
Schneider Electric LXM18MESU02M2X — Servo Drives

Schneider LXM18MESU02M2X Servo Drive, 0.2 kW, EtherCAT

MPNLXM18MESU02M2X
Active

Schneider Electric Easy Lexium 18M servo drive, LXM18MESU02M2X, 0.2 kW at 200...240 V single phase, EtherCAT integrated, STO, IP20, compact housing.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LXM18MESU02M2X — Identification
ParameterValue
Device short nameLXM18M
Product rangeEasy Lexium 18
Product typeMotion servo drive
LXM18MESU02M2X — Electrical
ParameterValue
Rated supply voltage200...240 V (- 10...10 %) for single phase
Supply voltage limits180...264 V single phase
LXM18MESU02M2X — Environmental
ParameterValue
IP ratingIP20

Product details

0.2 kW servo drive with integrated EtherCAT

The LXM18MESU02M2X is a Schneider Electric Easy Lexium 18M motion servo drive rated for 0.2 kW nominal power at 200...240 V single phase with an 8 kHz switching frequency. It carries an integrated EtherCAT communication interface and a Safe Torque Off (STO) function, making it a compact node for a daisy-chained motion network.

Current ratings and motor sizing

Continuous output current is 1.6 A at 8 kHz; the drive can deliver 5.8 A for 3 seconds peak, which covers acceleration and deceleration transients for a small servo motor without oversizing the drive. Line current draw is 2.3 A at 200...240 V single phase — budget this for the branch circuit and upstream protection.

Frequently asked questions

What is the continuous output current of LXM18MESU02M2X at 8 kHz?

The continuous output current is 1.6 A at 8 kHz switching frequency. The drive can deliver 5.8 A for 3 seconds peak for acceleration and deceleration transients.

What communication interface does LXM18MESU02M2X use?

It has an integrated EtherCAT interface, which allows direct connection to an EtherCAT motion network without an external gateway module.

MPN
LXM18MESU02M2X