Power and current — 0.75 kW at 8 kHz switching
The LXM18PDU07M2X: Nominal output is 0.75 kW at 220...240 V with the switching frequency set to 8 kHz. Continuous output current is 5.1 A at 8 kHz; a 3 s peak of 17.3 A is available for acceleration transients. The line draw on the single-phase supply is 8.5 A at full load — size the upstream breaker and wiring for that continuous draw plus the peak headroom.
Supply and network — single-phase 220...240 V, 50/60 Hz
Rated supply voltage is 220...240 V single phase (-15...+10 %), with supply frequency 50...60 Hz ±5 %. Network frequency tolerance is 47.5...63 Hz. Accepts input from 170...255 V single phase. No built-in EMC filter — plan an external filter if the installation requires conducted emission compliance.
Communication and I/O — Modbus plus integrated analog/digital
The drive includes Modbus communication and integrated digital I/O, analog I/O, PTI (pulse train input), and PTO (pulse train output). Two analog inputs are on board. This covers standalone positioning or speed control without an external motion controller for simple indexing or conveyor axes.
Mounting envelope — compact housing fit check
Format is compact housing: 166.5 mm deep, 155.5 mm wide, 78.0 mm high. IP20 rating means it is intended for indoor cabinet installation only — no washdown or outdoor exposure.