50 W continuous — what it drives
The LXM26DUA5M3X is a 50 W continuous-rated motion servo drive from the Easy Lexium 26 family, designed for low-power positioning axes — think small conveyors, pick-and-place grippers, or label applicators where the motor frame size is NEMA 17 or smaller. Continuous output current is 0.64 A at the 16 kHz switching frequency; the 3-second peak output current reaches 2 A at 220 V, giving headroom for acceleration transients without tripping.
Supply and line current — single or three phase
Accepts 200–255 V three-phase or 170–255 V single-phase input at 50/60 Hz (±5 %), with overvoltage category III — suitable for direct connection to a standard industrial mains supply in a control cabinet. Line current at peak overload is 0.8 A at 262.8 % for single-phase and 0.8 A at 227 % for three-phase — the percentage figure reflects the drive's internal current limit relative to rated current, not a continuous draw.
Obsolete — sourcing reality
Schneider Electric lists this drive as obsolete. Available through independent surplus and broker channels. Quantities are lot-specific and confirmed at RFQ — no stock-holding claim is made here.