Power cable for the Lexium MC12 multi carrier
The LXMMCAPC080S100 is the dedicated power-connection cable for the Schneider Electric Lexium MC12 multi carrier, classed as a connection accessory rather than a drive module itself — it carries the power leg between the MC12 carrier and the mating drive electronics rather than housing any control logic.
8 m length, M23 termination
Cable length is rated at 26.2 ft (8 m), giving the carrier-to-drive reach needed when the multi-carrier sits at the end of a long travel axis or where the cabinet must be remotely mounted away from the heat source — a hot-strip mill drive room, for instance, often forces the carrier into a separate enclosure. The connector is an M23, the circular industrial standard used across the Lexium MC12 power feed — the M23 shell and pinout are keyed, so the cable drops in without re-pinning, and the threaded coupling takes the vibration seen at the moving end of a multi-carrier track.
Lifecycle and sourcing posture
Supplied as a single unit per package, the cable is specified into a BOM position rather than stocked as a commodity — quoting to order against the RFQ is the realistic supply path, with availability and lead time confirmed when the carrier configuration and quantity are on the table.