Cable and connector for the Lexium MC12 multi carrier
The LXMMCAPC200S100 is the 20 m power-connection cable for the Schneider Electric Lexium MC12 multi carrier — the cordset that links the carrier's power input module to the drive side of a multi-axis servo installation, terminating in an M23 connector. The 20 m run lets the carrier sit well away from the controller cabinet, which matters on long transfer lines or where the motion module rides on a remote segment of the machine frame. At 20 m the cable falls inside the length envelope where voltage drop on the power conductors and EMI pickup on the parallel runs need to be accounted for in the cabinet layout — keep it routed clear of VFD output power cables and signal-level fieldbus to avoid coupling noise back into the carrier's power input.
M23 termination and the multi-carrier mating interface
The M23 connector on the LXMMCAPC200S100 is the keyed circular interface used across the Lexium MC12 power-connection accessories, so the cable mates directly with the matching power input on the carrier module without adapters. As a connection accessory in the Lexium MC12 family, it is part of the same cable set used to bring main power to each carrier on a multi-segment machine — specifying the exact 20 m length up front avoids splicing or field-built extensions on the install.
Lifecycle and sourcing posture
Schneider Electric lists the LXMMCAPC200S100 as current production, so there is no last-time-buy window or official successor to track. The part ships as a single-unit accessory and is sourced through independent distribution against an RFQ — pricing and current availability come back with the quote, not from a published list.