Arc-segment guide rail for the MC12 multi carrier
The LXMMCRABA68S100 is a guide rail set for the Lexium MC12 multi carrier, sold as a spare-part accessory rather than a drive module itself — the carrier system is what moves product between workstations, and this rail is the track segment that defines the 180° arc geometry on the loop. Installation direction is fixed at 180°, so it lays one arc segment of the multi-carrier track rather than a straight or curved short section — specifying a different arc angle requires a different LXMMCRABA-series code, not a field adjustment of this set.
Footprint for cabinet and loop planning
The set measures 200.3 mm deep by 260.7 mm wide by 100.1 mm long — the depth and width set the floor space the arc consumes inside the carrier frame, and the 100.1 mm length is the unit of arc length that scales the loop: a 180° curve is built up from multiple LXMMCRABA units stacked along the track, not from one oversized piece. Packaging is one unit of length per order code, so spares replenishment for a worn or damaged arc segment is quoted as single-segment quantities — confirm the loop arc length and segment count before placing a multi-line BOM so the carrier geometry rebuilds correctly after a track repair.