PacDrive 3 STS80 floor-mount SCARA
The LXMSTS80F200000 is a Schneider Electric PacDrive 3 STS80 floor-mount SCARA robot — a four-axis pick-and-place arm with ball-screw vertical drive and a user I/O cable, ordered as a single complete unit rather than a drive plus separate mechanics.
Axis envelope, speed, and repeatability
Four axes, ±0.01 mm repeat accuracy, with a vertical operating travel of 0–200 mm and horizontal reaches up to 1600 mm — a working envelope that fits mid-size tabletop cells and conveyor-side mount stations without forcing a footprint redesign. Axis 4 spins at 1200°/s nominal with a 1929°/s ceiling; the planar axes 1 and 2 run at 500°/s and 350°/s nominal respectively, peaking at 585°/s and 490°/s. Nominal linear speeds land at 1600 mm/s on axis 3 and 8.11 m/s on the planar pair, with a 2220 mm/s axis-3 maximum and 10.62 m/s on axes 1 and 2 — so the cycle-time ceiling is set by the planar axes, not the wrist.
Lifecycle — obsolete, no successor on record
Schneider Electric lists this order code as obsolete, with no official replacement MPN identified in the current catalogue. Sourcing now runs through independent surplus and broker channels, where lot condition and traceability vary — the spec on the nameplate still matches the PacDrive 3 controller family, but new factory shipments are no longer available.