Schneider Electric C60H Multi9 miniature circuit-breaker, 1P, 25 A rated, curve D, 15 kA breaking capacity at 240 V AC, thermal-magnetic trip, DIN rail mount.
| Parameter | Value |
|---|---|
| Product name | C60 |
| Product / component type | Miniature circuit-breaker |
| Product range | Multi9 |
| Device short name | C60H |
| Poles description | 1P |
| Number of protected poles | 1 |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Rated current (In) | 25 A at 50 °C conforming to EN/IEC 60947-2 |
| Rated operational voltage (Ue) | 240 V AC 50/60 Hz phase to neutral |
| Tripping curve code | D |
| Magnetic tripping limit | 12 x In +/- 20 % |
| Breaking capacity (Icu / AIR) | 15 kA Icu at 240 V AC 50/60 Hz phase to neutral conforming to EN/IEC 60947-2 4 kA Icu at 415 V AC 50/60 Hz phase to neutral conforming to EN/IEC 60947-2 |
| Network type (AC/DC) | AC |
| Network frequency | 50/60 Hz |
| Trip unit technology | Thermal-magnetic |
| Control / actuation type | Toggle |
| Mechanical durability (cycles) | 20000 cycles |
| Parameter | Value |
|---|---|
| Terminal connections / wire range | Tunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end |
| Mounting support | 35 mm symmetrical DIN rail |
| Mounting mode | Fixed |
| Width | 18 mm |
| Height | 81 mm |
| Depth | 73 mm |
| Tightening torque (by circuit) | Power circuit: 2 N.m |
| Parameter | Value |
|---|---|
| Operating ambient temperature | -30...70 °C |
| Storage ambient temperature | -40...80 °C |
| IP degree of protection | IP20 conforming to EN/IEC 60947-2 |
| Parameter | Value |
|---|---|
| Conformity standards | EN/IEC 60947-2 |
The MGN25088 is a C60H miniature circuit-breaker from the Multi9 range, rated 25 A at 50 °C per EN/IEC 60947-2.
Snaps onto 35 mm symmetrical DIN rail inside a distribution panel or sub-board. The toggle gives local ON/OFF indication — useful for a panel wireman tracing circuits during commissioning.
15 kA Icu at 240 V AC 50/60 Hz phase-to-neutral, and 4 kA Icu at 415 V AC, both per EN/IEC 60947-2. The service breaking capacity (Ics) is 50 % of those values.