Skip to main content
Log in
Schneider Electric MGN25114 — 2-Pole MCB (DIN Rail)

MGN25114 C60H MCB, 2P, 6A, D Curve, 30 kA, Multi9

MPNMGN25114
Obsolete

Schneider Electric C60H Multi9 series, MGN25114 miniature circuit breaker, 2-pole, 6 A, D curve, 30 kA Icu at 240 V AC, 35 mm DIN rail mount.

Schneider Electric MGN25114 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MGN25114 — Identification
ParameterValue
Product nameC60
Product rangeC60
Series / familyMulti9
Device short nameC60H
Product / component typeMiniature circuit-breaker
Device applicationDistribution
MGN25114 — Electrical
ParameterValue
Rated current [In]6 A at 50 °C conforming to EN/IEC 60947-2
Number of protected poles2
Pole configuration2P
Rated operational voltage [Ue]440 V AC 50/60 Hz 240 V AC 50/60 Hz phase to phase
Network type (AC/DC)AC
Network frequency50/60 Hz
MGN25114 — Protection
ParameterValue
Tripping curve codeD
Magnetic tripping limit12 x In +/- 20 %
Breaking capacity (Icu)30 kA Icu at 240 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 15 kA Icu at 415 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 10 kA Icu at 440 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2
Rated service breaking capacity [Ics]15 kA 50 % conforming to EN/IEC 60947-2 - 240 V AC 50/60 Hz 7.5 kA 50 % conforming to EN/IEC 60947-2 - 415 V AC 50/60 Hz 5 kA 50 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz
Suitable for isolationYes conforming to EN/IEC 60947-2
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Operating / control typeToggle
Mechanical durability (cycles)20000 cycles
MGN25114 — Mechanical
ParameterValue
9 mm pitches4
Width36 mm
Height81 mm
Depth73 mm
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Terminal connectionsTunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end
Terminal tightening torquePower circuit: 2 N.m
Comb busbar / distribution block compatibilityTop or bottom: YES
Local signalling / indicationON/OFF indication
Contact position indicatorYes
MGN25114 — Environmental
ParameterValue
Operating temperature range-30...70 °C
Storage temperature range-40...80 °C
MGN25114 — Approvals
ParameterValue
Standards / complianceEN/IEC 60947-2

Product details

The Schneider Electric MGN25114 is a C60H miniature circuit breaker from the Multi9 range, designed for distribution applications. It is a 2-pole, 6 A thermal-magnetic breaker with a D tripping curve, rated to EN/IEC 60947-2.

Breaking capacity and duty

Rated breaking capacity hits 30 kA Icu at 240 V AC phase-to-phase, 15 kA at 415 V, and 10 kA at 440 V — all per EN/IEC 60947-2. For a 6 A frame, that is generous headroom; it clears high-fault bolted faults without upstream coordination issues in most panelboard designs.

Snaps onto 35 mm symmetrical DIN rail, occupies 4 x 9 mm pitches (36 mm wide). Tunnel terminals accept 1…25 mm² rigid or flexible wire; torque to 2 N·m. IP20 finger-safe front.

Frequently asked questions

How do I get current pricing and availability for MGN25114?

Submit an RFQ through this listing. Availability and current pricing are confirmed at quote time through independent distribution channels.

What is the closest alternative to MGN25114 in the same family?

Within the C60H series, the main variant differences are pole count, rated current, and trip curve. The MGN25114 is a 2-pole, 6 A, D-curve unit. A 1-pole or 3-pole version with the same curve and similar breaking capacity would be the closest functional alternative if the pole count differs.

What compliance documentation does MGN25114 carry?

The breaker is certified to EN/IEC 60947-2, with pollution degree 3. It carries CE marking for the European market. Specific RoHS/REACH declarations are available from the manufacturer upon request.

MPN
MGN25114