Skip to main content
Log in
Schneider Electric MGN60507 — 1-Pole MCB (DIN Rail)

MGN60507 C60N MCB, 2 A Curve D, 1P, 10 kA, Multi9

MPNMGN60507
Obsolete

Schneider Electric Multi9 C60N, MGN60507, miniature circuit breaker, 1P, 2 A, Curve D, 10 kA Icu at 240 V AC, thermal-magnetic, 35 mm DIN rail.

Schneider Electric MGN60507 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MGN60507 — Identification
ParameterValue
Product nameC60
Product / component typeMiniature circuit-breaker
Product rangeMulti9
Device short nameC60N
Poles description1P
Number of protected poles1
Device applicationDistribution
MGN60507 — Electrical & Protection
ParameterValue
Rated current (In)2 A at 50 °C conforming to EN/IEC 60947-2
Rated operational voltage (Ue)240 V AC 50/60 Hz phase to neutral
Tripping curve codeD
Magnetic tripping limit12 x In +/- 20 %
Breaking capacity (Icu / AIR)10 kA Icu at 240 V AC 50/60 Hz phase to neutral conforming to EN/IEC 60947-2 3 kA Icu at 415 V AC 50/60 Hz phase to neutral conforming to EN/IEC 60947-2
Network type (AC/DC)AC
Network frequency50/60 Hz
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
MGN60507 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Width18 mm
Height81 mm
Depth73 mm
Tightening torque (by circuit)Power circuit: 2 N.m
MGN60507 — Environmental
ParameterValue
Operating ambient temperature-30...70 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to EN/IEC 60947-2
MGN60507 — Approvals
ParameterValue
Conformity standardsEN/IEC 60947-2

Product details

What this 2 A Curve D MCB does in the panel

The MGN60507 is a single-pole C60N miniature circuit breaker from the Multi9 range, rated 2 A at 50 °C with a D tripping curve. The breaking capacity is 10 kA Icu at 240 V AC phase-to-neutral, and 3 kA Icu at 415 V AC, both per EN/IEC 60947-2.

The 18 mm width (one modular pitch) means it takes up a single slot.

Service breaking capacity Ics is 7.5 kA (75 % of Icu) at 240 V, and 2.25 kA at 415 V. Pollution degree 3, so it's rated for the conductive-dust and humidity conditions typical of industrial control panels. Electrical durability is 10,000 cycles, mechanical 20,000 cycles. The thermal-magnetic trip unit is non-interchangeable — what you see is what you get, no field-swap of the trip module.

Frequently asked questions

Where can I buy MGN60507 and get a price?

The MGN60507 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the breaking capacity of MGN60507?

The MGN60507 has a breaking capacity of 10 kA Icu at 240 V AC phase-to-neutral, and 3 kA Icu at 415 V AC, both per EN/IEC 60947-2.

What does Curve D mean on this breaker?

Curve D means the magnetic trip threshold is 12 x In (24 A for this 2 A breaker), plus or minus 20 %. It's designed for loads with high inrush, like small motors or transformers, where a C curve would trip on startup.

What compliance standards does MGN60507 meet?

The MGN60507 is designed and tested to EN/IEC 60947-2, the standard for low-voltage switchgear and controlgear circuit breakers. It carries IP20 protection per that standard.

MPN
MGN60507