Skip to main content
Log in
Schneider Electric MGN60608 — 1-Pole MCB (DIN Rail)

MGN60608 C60H MCB, 1A C-curve 1P, 15kA/240V

MPNMGN60608
Obsolete

Schneider Electric Multi9 C60H series, MGN60608 miniature circuit-breaker, 1A rated current, C-curve, 1-pole, 15 kA Icu at 240 V AC, EN/IEC 60947-2.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MGN60608 — Identification
ParameterValue
Product nameC60
Product / component typeMiniature circuit-breaker
Product rangeMulti9
Device short nameC60H
Poles description1P
Number of protected poles1
Device applicationDistribution
MGN60608 — Electrical & Protection
ParameterValue
Rated current (In)1 A at 50 °C conforming to EN/IEC 60947-2
Rated operational voltage (Ue)240 V AC 50/60 Hz phase to neutral 415 V AC 50/60 Hz phase to phase
Tripping curve codeC
Magnetic tripping limit8.5 x In +/- 20 %
Breaking capacity (Icu / AIR)15 kA Icu at 240 V AC 50/60 Hz phase to neutral conforming to EN/IEC 60947-2 4 kA Icu at 415 V AC 50/60 Hz phase to neutral conforming to EN/IEC 60947-2 24 kA Icu at 60 V DC phase to phase conforming to EN/IEC 60947-2
Network type (AC/DC)DC
Trip unit technologyThermal-magnetic
Control / actuation typeToggle
Mechanical durability (cycles)20000 cycles
MGN60608 — Mounting & Connection
ParameterValue
Terminal connections / wire rangeTunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Width18 mm
Height81 mm
Depth73 mm
Tightening torque (by circuit)Power circuit: 2 N.m
MGN60608 — Environmental
ParameterValue
Operating ambient temperature-30...70 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to EN/IEC 60947-2
MGN60608 — Approvals
ParameterValue
Conformity standardsEN/IEC 60947-2

Product details

The Schneider Electric MGN60608 is a C60H miniature circuit-breaker from the Multi9 range, rated 1 A at 50 °C with a C-curve trip characteristic (magnetic tripping at 8.5 x In ±20%). It protects a single pole (1P) in a 240 V AC phase-to-neutral or 415 V AC phase-to-phase distribution circuit, conforming to EN/IEC 60947-2.

Snaps onto a 35 mm symmetrical DIN rail — fixed mounting, 18 mm width (2 x 9 mm pitches), 81 mm height, 73 mm depth. IP20 finger-safe front, pollution degree 3 — fine for a clean panel, not for washdown zones.

Frequently asked questions

What is MGN60608's listed depth (73 mm) on this component line?

The MGN60608 has a depth of 73 mm, measured from the DIN rail mounting surface to the front of the toggle.

What is MGN60608's listed range (Multi9) on this component line?

The MGN60608 belongs to the Multi9 range, specifically the C60H series of miniature circuit-breakers.

MPN
MGN60608