Skip to main content
Log in
Schneider Electric MGN60628 — 2-Pole MCB (DIN Rail)

MGN60628 C60H MCB, 20 A, 2P, C Curve, 30 kA, Multi9

MPNMGN60628
Obsolete

Schneider Electric C60H Multi9 miniature circuit-breaker, MGN60628, 20 A rated current, 2 poles, C curve, 30 kA breaking capacity at 240 V AC, EN/IEC 60947-2.

Schneider Electric MGN60628 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MGN60628 — Identification
ParameterValue
Product nameC60
Product rangeC60
Series / familyMulti9
Device short nameC60H
Product / component typeMiniature circuit-breaker
Device applicationDistribution
MGN60628 — Electrical
ParameterValue
Rated current [In]20 A at 50 °C conforming to EN/IEC 60947-2
Number of protected poles2
Pole configuration2P
Rated operational voltage [Ue]440 V AC 50/60 Hz 240 V AC 50/60 Hz phase to phase 415 V AC 50/60 Hz phase to phase
Network type (AC/DC)DC
MGN60628 — Protection
ParameterValue
Tripping curve codeC
Magnetic tripping limit8.5 x In +/- 20 %
Breaking capacity (Icu)30 kA Icu at 240 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 15 kA Icu at 415 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 10 kA Icu at 440 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 25 kA Icu at 125 V DC phase to phase conforming to EN/IEC 60947-2
Rated service breaking capacity [Ics]15 kA 50 % conforming to EN/IEC 60947-2 - 240 V AC 50/60 Hz 7.5 kA 50 % conforming to EN/IEC 60947-2 - 415 V AC 50/60 Hz 5 kA 50 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz 25 kA 100 % conforming to EN/IEC 60947-2 - 125 V DC
Suitable for isolationYes conforming to EN/IEC 60947-2
Trip unit technologyThermal-magnetic
Earth-leakage protectionSeparate block
Operating / control typeToggle
Mechanical durability (cycles)20000 cycles
MGN60628 — Mechanical
ParameterValue
9 mm pitches4
Width36 mm
Height81 mm
Depth73 mm
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Terminal connectionsTunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end
Terminal tightening torquePower circuit: 2 N.m
Comb busbar / distribution block compatibilityTop or bottom: YES
Local signalling / indicationON/OFF indication
Contact position indicatorYes
MGN60628 — Environmental
ParameterValue
Operating temperature range-30...70 °C
Storage temperature range-40...80 °C
MGN60628 — Approvals
ParameterValue
Standards / complianceEN/IEC 60947-2

Product details

The MGN60628 is a C60H miniature circuit-breaker from the Multi9 range, rated 20 A at 50 °C per EN/IEC 60947-2. Two protected poles, C curve — magnetic trip at 8.5 x In ±20 %. Breaking capacity hits 30 kA Icu at 240 V AC phase-to-phase, 15 kA at 415 V AC, and 25 kA at 125 V DC — all per EN/IEC 60947-2. That 30 kA figure at 240 V gives you headroom on a typical 480Y/277 V panel fed from a 150 kVA transformer; the 125 V DC rating makes it useful for DC distribution in control cabinets or battery-backed circuits.

Snaps onto 35 mm symmetrical DIN rail. 36 mm wide (4 x 9 mm pitches), 81 mm tall, 73 mm deep. IP20 finger-safe front. Comb busbar compatible top or bottom.

Frequently asked questions

Where can I buy MGN60628 and how do I get a price?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is MGN60628's breaking capacity?

30 kA Icu at 240 V AC phase-to-phase, 15 kA at 415 V AC, 10 kA at 440 V AC, and 25 kA at 125 V DC, all per EN/IEC 60947-2.

What standards does MGN60628 comply with?

Conforms to EN/IEC 60947-2, pollution degree 3, suitable for isolation.

MPN
MGN60628