MGN60867 — C60N 1P C-curve 10 A MCB
The MGN60867 is a Schneider Electric C60N miniature circuit breaker from the Multi9 range, configured as a single-pole unit with a C-curve trip characteristic and a 10 A rated current at 50 °C per EN/IEC 60947-2. Rated breaking capacity is 10 kA Icu at 240 V AC phase-to-neutral, with a corresponding service breaking capacity (Ics) of 7.5 kA at the same voltage — 75 % of the ultimate rating, which is typical for a distribution-grade MCB and means it can safely clear faults up to that level without needing replacement after a single interruption. Pollution degree 3 per EN/IEC 60947-2 suits it for industrial panels where conductive dust or humidity is present.
Mounts fixed on 35 mm DIN rail. The IP20 finger-safe front is standard for enclosed distribution boards. Rated operational voltage is 240 V AC phase-to-neutral. The 1P configuration protects a single pole; earth-leakage protection requires a separate add-on block. A contact position indicator and ON/OFF local signalling are built in. The C60N is category A (no intentional short-time delay), so it coordinates as a standard downstream device in a selective scheme.