Schneider Electric Multi9 C60N series, MGN60882, 20 A, 2-pole, C-curve miniature circuit breaker, 10 kA Icu at 415 V AC, DIN rail mount.
| Parameter | Value |
|---|---|
| Product name | C60 |
| Product range | C60 |
| Series / family | Multi9 |
| Device short name | C60N |
| Product / component type | Miniature circuit-breaker |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Rated current [In] | 20 A at 50 °C conforming to EN/IEC 60947-2 |
| Number of protected poles | 2 |
| Pole configuration | 2P |
| Rated operational voltage [Ue] | 440 V AC 50/60 Hz 240 V AC 50/60 Hz phase to phase |
| Network type (AC/DC) | DC |
| Parameter | Value |
|---|---|
| Tripping curve code | C |
| Magnetic tripping limit | 8.5 x In +/- 20 % |
| Breaking capacity (Icu) | 20 kA Icu at 240 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 10 kA Icu at 415 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 6 kA Icu at 440 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 |
| Rated service breaking capacity [Ics] | 15 kA 75 % conforming to EN/IEC 60947-2 - 240 V AC 50/60 Hz 7.5 kA 75 % conforming to EN/IEC 60947-2 - 415 V AC 50/60 Hz 4.5 kA 75 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz |
| Suitable for isolation | Yes conforming to EN/IEC 60947-2 |
| Trip unit technology | Thermal-magnetic |
| Earth-leakage protection | Separate block |
| Operating / control type | Toggle |
| Mechanical durability (cycles) | 20000 cycles |
| Parameter | Value |
|---|---|
| 9 mm pitches | 4 |
| Width | 36 mm |
| Height | 81 mm |
| Depth | 73 mm |
| Mounting support | 35 mm symmetrical DIN rail |
| Mounting mode | Fixed |
| Terminal connections | Tunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end |
| Terminal tightening torque | Power circuit: 2 N.m |
| Comb busbar / distribution block compatibility | Top or bottom: YES |
| Local signalling / indication | ON/OFF indication |
| Contact position indicator | Yes |
| Parameter | Value |
|---|---|
| Operating temperature range | -30...70 °C |
| Storage temperature range | -40...80 °C |
| Parameter | Value |
|---|---|
| Standards / compliance | EN/IEC 60947-2 |
The MGN60882: Rated Icu of 20 kA at 240 V AC phase-to-phase, 10 kA at 415 V AC, and 6 kA at 440 V AC — these are the maximum fault currents the breaker can safely interrupt.
C-curve magnetic trip at 8.5 x In (±20 %). Thermal element handles 20 A continuous at 50 °C.
IP20 finger-safe front; comb busbar compatible top or bottom. The 73 mm depth fits standard distribution board enclosures with gland-plate clearance.
10 kA Icu at 415 V AC phase-to-phase, with an Ics of 7.5 kA (75 %).
Within the C60N range, the closest peer is a 2-pole C-curve breaker at a different current rating — the physical footprint (36 mm width, DIN rail mount) and breaking capacity are identical; only the In rating changes. No pin-compatible alternative exists outside the C60 series without re-termination.