Skip to main content
Log in
Schneider Electric MGN61311 — 2-Pole MCB (DIN Rail)

MGN61311 Multi9 C60 Miniature Circuit Breaker, 0.5 A, C-Curv

MPNMGN61311
Obsolete

Schneider Electric Multi9 C60 miniature circuit breaker, MGN61311, 2-pole, 0.5 A rated current, C-curve, 10 kA breaking capacity per UL 489, gray, DIN-rail clip-on.

Schneider Electric MGN61311 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MGN61311 — Identification
ParameterValue
Product nameMulti9 C60
Series / familyMulti9
Device short nameC60 UL489
Product / component typeMiniature circuit-breaker
Device applicationDistribution
MGN61311 — Electrical
ParameterValue
Number of protected poles2
Pole configuration2P
Rated operational voltage [Ue]480Y/277 V AC
Network type (AC/DC)AC
Network frequency50/60 Hz
MGN61311 — Protection
ParameterValue
Tripping curve codeC
Magnetic tripping limit8.5 x In +/- 20 % AC
Breaking capacity (Icu)10 kA AIR 480Y/277 V AC UL 489 10 kA AIR 480Y/277 V AC CSA C22.2 No 5.2 10 kA Icu 480Y/277 V AC EN/IEC 60947-2 10 kA Icu 480Y/277 V AC GB 14048.2
Energy limitation class3 EN/IEC 60947-2
Suitable for isolationYes EN/IEC 60947-2
Overvoltage categoryIV
Trip unit technologyThermal-magnetic
Operating / control typeToggle
Mechanical durability (cycles)20000 cycles
MGN61311 — Mechanical
ParameterValue
9 mm pitches4
Width1.4 in (36 mm)
Height5.6 in (141 mm)
Depth2.7 in (68.7 mm)
Mounting supportDIN rail
Mounting modeClip-on
Terminal connectionsTunnel type terminal top or bottom) - 1 0.002...0.002 in² (1...1.5 mm²) AWG 18...AWG 16) - rigid Tunnel type terminal top or bottom) - 2 0.002...0.002 in² (1...1.5 mm²) AWG 18...AWG 16) - rigid
Terminal tightening torque7.08 lbf.in (0.8 N.m) top or bottom
Local signalling / indicationON/OFF indication
Contact position indicatorYes
MGN61311 — Environmental
ParameterValue
Operating temperature range-22...158 °F (-30...70 °C)
Storage temperature range-40...176 °F (-40...80 °C)
Relative humidity95 % 131 °F (55 °C)
MGN61311 — Approvals
ParameterValue
Standards / complianceGB 14048.2 EN/IEC 60947-2 UL 489 CSA C22.2 No 5

Product details

MGN61311 — Multi9 C60 0.5 A MCB, C-Curve, 2-Pole

The MGN61311 is a 2-pole miniature circuit breaker from the Schneider Electric Multi9 C60 range, rated 0.5 A at 77 °F (25 °C) with a C-curve trip characteristic (8.5 x In magnetic tripping limit, ±20 % on AC). It carries a 10 kA breaking capacity under UL 489 at 480Y/277 V AC, and is also rated 10 kA Icu per EN/IEC 60947-2 and GB 14048.2.

Clip-on mounting onto DIN rail (35 mm per EN 60715) — occupies 4 x 9 mm pitches (36 mm width). The 2.7 in (68.7 mm) depth and 5.6 in (141 mm) height fit standard distribution board cutouts. Tunnel-type terminals accept 1 to 1.5 mm² rigid conductors (AWG 18 to 16), top or bottom, with a tightening torque of 0.8 N·m. IP20 finger protection per IEC 60529; IP40 in modular enclosure.

Listed under UL 489 and CSA C22.2 No 5, plus EN/IEC 60947-2 and GB 14048.2. Suitability for isolation per EN/IEC 60947-2. Lifecycle status: current production.

Durability and Service Life

Rated for 10,000 electrical cycles and 20,000 mechanical cycles. Padlockable toggle for lockout/tagout. Local ON/OFF indication on the toggle.

Frequently asked questions

What is the breaking capacity of MGN61311?

10 kA AIR under UL 489 at 480Y/277 V AC, and 10 kA Icu per EN/IEC 60947-2 at the same voltage.

What compliance documentation does MGN61311 carry?

UL 489, CSA C22.2 No 5, EN/IEC 60947-2, and GB 14048.2. Pollution degree 3, overvoltage category IV, tropicalisation class 2 per IEC 60068-1.

Where can I buy MGN61311 and how is it quoted?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing confirmed at quote time.

MPN
MGN61311