Schneider Electric PowerPacT 4, Molded Case Circuit Breaker, 1P, 40 A, 230 V AC, 25 kA Icu, L3 phase connection.
| Parameter | Value |
|---|---|
| Product / component type | Circuit breaker |
| Poles description | 1P |
| Device application | Distribution |
| Parameter | Value |
|---|---|
| Rated current (In) | 40 A at 40 °C |
| Rated operational voltage (Ue) | 230 V AC 50/60 Hz |
| Trip unit technology | Thermal-magnetic |
| Control / actuation type | Toggle |
| Mechanical durability (cycles) | 20000 cycles |
| Parameter | Value |
|---|---|
| Mounting support | Backplate |
| Mounting position | Horizontal and vertical |
| Parameter | Value |
|---|---|
| Conformity standards | BS EN 60947-2 |
| Parameter | Value |
|---|---|
| [Ui] rated insulation voltage | 750 V |
| [Uimp] rated impulse withstand voltage | 8 kV |
The Schneider Electric MGP0401L3 is a 1-pole PowerPacT 4 molded case circuit breaker (MCCB) rated 40 A at 40 °C, with a 25 kA ultimate breaking capacity (Icu) at 230 V AC 50/60 Hz. The toggle control and backplate mounting suit panel-mounted distribution boards where a single-pole, 1-module (35 mm) breaker is needed for L3 phase connection.
This part is obsolete per the manufacturer's lifecycle status.
The 25 kA Icu at 230 V AC is the ultimate breaking capacity.
The MGP0401L3 is listed to BS EN 60947-2, the standard for low-voltage circuit breakers. It also carries suitability for isolation conforming to that standard.
The control type is Toggle — a manual switch handle on the front of the breaker for on/off operation.
No related articles