930 W servo for high-speed positioning
The MH30701P06A2200 is a three-phase servo motor from Schneider Electric's MH3 series, delivering 930 W continuous power at 5500 rpm nominal speed. That speed range suits applications like pick-and-place, packaging, and spindle drives where cycle time drives throughput. Nominal torque depends on the drive voltage and supply configuration: 1.38 N.m at 115 V three-phase, 1.34 N.m at 230 V single-phase, 1.30 N.m at 400 V three-phase, and 1.27 N.m at 480 V three-phase. The peak stall torque reaches 4.2 N.m across the 115–480 V range, giving a 3:1 overload margin for acceleration transients.
Encoder feedback and shaft configuration
Feedback comes from a single-turn SinCos Hiperface encoder, providing absolute position within one revolution — no homing cycle needed after power-up for rotary applications. The smooth shaft (no keyway) means torque transfers through a clamping or friction coupling; confirm the coupling bore matches the 11 mm shaft diameter.
Mounting and environmental fit
The motor uses an international standard 70 mm flange with a 60 mm centring collar and 5.5 mm mounting holes. Overall length is 122 mm, and the rotatable right-angled connectors let the cable exit in any orientation — useful when the motor is tucked against a machine frame or inside a tight enclosure. IP65 standard rating means the motor body is sealed against dust ingress and low-pressure water jets — suitable for washdown environments in food processing or machining centres where coolant spray is present. Cooling is by natural convection; no external fan or forced air is required at the rated duty.