Torque and speed profile across drive voltages
The MH30702P02A2200 delivers a nominal torque that depends on the drive supply: 2.37 N·m at 115 V three-phase, 2.23 N·m at 230 V single-phase, 2.01 N·m at 400 V three-phase, and 1.89 N·m at 480 V three-phase. The continuous stall torque is 2.48 N·m across the 115–480 V three-phase range, with a peak stall torque of 7.4 N·m for short-duration acceleration moves. Nominal speed is 5500 rpm, with a maximum mechanical speed of 8000 rpm — the overspeed margin allows the motor to follow rapid deceleration profiles without exceeding the rotor limit.
Feedback and sealing for production environments
The Multiturn SinCos Hiperface encoder provides absolute position feedback over multiple revolutions — the drive knows the shaft position at power-up without a homing sequence, which cuts cycle time on machines that power-cycle between batches. Rated IP65, the motor body and connector interface resist dust ingress and low-pressure water jets — suitable for food-processing or washdown zones where hose-down cleaning is routine.