1540 W continuous power at 5000 rpm
The MH30703P02A2200 is a three-phase servo motor from the Schneider Electric MH3 series, delivering 1540 W continuous power at a nominal speed of 5000 rpm. That speed range suits direct-drive applications like spindle spindles or high-speed pick-and-place axes where you need the torque at the tool without a gearbox. Nominal torque is 3.18 N.m (28.15 lbf.in) when paired with an LXM52 or LXM62 drive at 115 V three-phase, and the torque curve holds across supply voltages — 2.96 N.m at 230 V single-phase, 2.53 N.m at 400 V three-phase, and 2.26 N.m at 480 V three-phase. Peak stall torque reaches 10.2 N.m (90.3 lbf.in) across the 115...480 V three-phase range, giving you the headroom for acceleration transients without oversizing the motor frame.
Encoder feedback and mechanical fit
Encoder type is Multiturn SinCos Hiperface — a standard for industrial servo loops that gives absolute position over multiple revolutions without a home cycle. The smooth shaft (no keyway) measures 14 mm diameter by 30 mm length, and the motor flange is 70 mm square with a 60 mm pilot diameter and 2.5 mm centring collar depth. Mounting holes are 5.5 mm diameter on the international standard flange pattern. IP65 protection means the motor body and connector interface resist dust ingress and low-pressure water jets — fine for washdown zones in food processing or machine-tool coolant splash. Cooling is natural convection, so no external fan or air supply needed; just ensure the mounting surface and ambient air path are clear for heat dissipation.