2270 W continuous power, 1000 rpm nominal speed
The MH31002P01A2200 is a Schneider Electric servo motor from the MH3 series, a three-phase unit rated for 2270 W continuous power and 1000 rpm nominal speed. Nominal torque sits at 5.67 N.m (50.18 lbf.in) when paired with an LXM52 or LXM62 drive at 115 V three-phase input — that's the torque you can count on for continuous duty cycles. Peak stall torque reaches 18 N.m (159.3 lbf.in) across the 115...480 V three-phase range, giving you the headroom for acceleration spikes or short overload events without dropping out of sync.
Encoder feedback and mounting fit
Feedback comes from a single-turn SinCos Hiperface encoder — a standard for absolute position feedback in servo systems, giving the drive continuous position data without needing a home cycle on power-up. The motor flange is 100 mm (3.9 in) with a 95 mm centring collar and four 9 mm mounting holes, matching the international standard flange pattern for this size class. Shaft is smooth, 19 mm diameter, 40 mm long — no keyway, so you'll need a clamping or friction-lock coupling if your load requires positive drive without slippage.
IP65 and cooling — built for washdown environments
Rated IP65 standard, meaning the motor body is sealed against dust ingress and low-pressure water jets from any direction — suitable for food processing, packaging lines, or any area where washdown is routine. Cooling is by natural convection — no external fan, so you need to account for ambient airflow in the enclosure or mounting position to keep the winding temperature within the 135 °C copper hot-spot limit. Maximum radial force at the shaft is 990 N at 1000 rpm, derating to 580 N at 5000 rpm — important when the motor directly drives a belt or pulley that applies side load to the bearings.
Active production, sourced per RFQ
No holding brake is fitted on this variant (: Without), so if your vertical axis or safety circuit requires a brake, you'll need to either add an external brake or select the braked version of this motor frame.