Motor ratings that drive the drive selection
The MH31003P07A2200: Rated 3270 W continuous power at 4000 rpm nominal speed, this MH3-series motor delivers 8.45 Nm rated torque when paired with an LXM52 drive at 115 V three-phase input, and 7.63 Nm at 230 V single-phase — the torque curve shifts with the drive supply, so match the drive voltage to the load profile before committing the BOM line. Peak stall torque hits 27 Nm across the 115-480 V three-phase range, with a continuous stall current of 7.69 A — enough for short-duration overloads on indexing or clamping axes without oversizing the drive. The Multiturn SinCos Hiperface encoder gives absolute position feedback across multiple revolutions, so the controller knows the shaft angle at power-up without a homing cycle — critical for gantry or rotary-table applications where lost position means a crash.
Mounting and environmental fit
IP65 standard rating means the housing withstands washdown and dust ingress — the motor mounts directly on food-processing or packaging lines without a cover. The 100 mm IEC flange (3.9 in) with a 95 mm centring collar and 9 mm mounting holes fits standard gearbox adapters. Smooth shaft end — no keyway — so the coupling or pulley must clamp onto the 19 mm diameter shaft. The 40 mm shaft engagement length gives enough grip surface for a collet-style coupling rated to the 27 Nm peak torque.