The MH31402P02A2200: This MH3-series servo motor delivers 3.73 kW continuous power at 400 V or 480 V three-phase supply, with a nominal speed of 3000 rpm and a maximum mechanical speed of 4000 rpm. Continuous stall torque is 18.5 N·m across the 115–480 V range, and the peak stall torque hits 55.5 N·m — that's the short-term overload capability for acceleration or emergency stops, not the continuous rating. The 140 mm flange (IEC standard) with a 24 mm smooth shaft means you need a clamping-type coupling — no keyway, so the hub must grip the shaft directly.
Encoder and feedback — Multiturn SinCos Hiperface
The Multiturn SinCos Hiperface encoder provides absolute position feedback over multiple revolutions, so the drive knows the motor's exact position after a power cycle — no homing routine needed on startup. This encoder type is common with Schneider's LXM52 and LXM62 drive families; the torque values listed in the spec are paired to those drives at various supply voltages.
IP65 and cooling — built for washdown environments
Rated IP65 standard, meaning the motor body is sealed against dust ingress and low-pressure water jets — suitable for food processing, beverage lines, or any area that gets hosed down. Cooling is natural convection — no external fan, so the motor relies on the mounting surface and ambient airflow to shed heat. The continuous stall current of 16.83 A and stator resistance of 0.23 Ω give a starting point for thermal checks in the application.