Motor specs that matter on the line
The MH31403P01F2200: This is a Schneider Electric MH3 series servo motor with an integrated holding brake — the brake pulls in at 19 W and holds 203.6 lbf.in (23 N.m) of torque, so the load stays put when power drops. The single-turn SinCos Hiperface encoder gives absolute position within one revolution — no homing sequence needed on power-up for rotary applications, but if your axis travels more than one turn you'll need a multiturn encoder or a separate home sensor.
Mounting and environmental fit
IP65 standard protection means the motor body and the right-angled connector interface are sealed against washdown — suitable for food-and-bev lines or wet machining areas, as long as the cable gland is properly torqued. The flange size is 5.5 in (140 mm) with a centring collar diameter of 5.1 in (130 mm) and a centring collar depth of 0.1 in (3.5 mm). It mounts on an international standard flange — no custom bracket needed for most common gearbox or machine frames. Natural convection cooling — no fan, so it relies on the machine's ambient airflow. Max radial force at 1000 rpm is 2420 N, dropping to 1670 N at 3000 rpm; keep the belt tension or coupling load within that envelope to avoid bearing wear.