Skip to main content
Log in
Schneider Electric PM810RDMG

Schneider PM810RDMG PowerLogic PM800 Power Meter, 600 V, 0.5%

MPNPM810RDMG
Obsolete

Schneider PM810RDMG Electric — now discontinued, supplied from remaining surplus and broker stock.

$1,434.00Ref. price · indicative, final on quote
Schneider Electric PM810RDMG datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

PM810RDMG key specifications
ParameterValue
Input typeCurrent 0.005...10 A (impedance <= 0.1 Ohm)
Display typeRemote LCD display
Range of productPowerLogic PM800
Type of measurementCurrent Voltage Frequency Power factor total Apparent power total Active power total Reactive power total Apparent power per phase Active power per phase Reactive power per phase Energy Power factor per phase
Type of installationIndoor installation
Product or component typePower meter
Supply voltage125...250 V DC 115...415 V AC 45...67 Hz 115...415 V AC 350...450 Hz
Measurement voltage0...600 V AC phase to phase 0...347 V AC phase to neutral
Measurement current5 A 1 A
Power quality analysisUp to the 31st harmonic
Maximum power consumption in15 VA
Network frequency350...450 Hz 45...67 Hz

All specifications

PM810RDMG additional specifications
ParameterValue
I/O channels1 digital 0...5 mA 24...125 V AC/DC
IP degree of protectionIP30 back: conforming to IEC 60529 IP52 front face: conforming to IEC 60529
Communication port supportRS485
Communication port protocolModbus 38.4 kbauds
Mounting modeFlush-mounted
Mounting supportDIN rail meter device Panel display
Pollution degree2
Relative humidity90 % 104 °F (40 °C)
Operating altitude0...9842.52 ft (0...3000 m)
DepthMeter : 2.7 in (69.4 mm) Display : 0.7 in (17.8 mm)
Width3.8 in (96 mm)
Height3.8 in (96 mm)
StandardsCSA C22.2 No 14 UL 508 IEC 61010-1
Category09786-SE ENTRY POWER METER
Sample rate128 samples/cycle
AccuracyClass 2 reactive energy IEC 62053-23 Class 0.5S active energy IEC 62053-22 Class 0.2 active energy ANSI C12.20
Data recordingGPS synchronisation Time stamping Min/max of instantaneous values Without memory Alarms
Device short namePM810
Display resolution6 lines
Provided equipment3 m cable Remote display Remote display adapter
Measurement accuracyCurrent 0.5 % 0.5...10 A Voltage 0.2 % 10...227 V Energy 0.2 % Frequency 0.01 Hz Power factor 0.002 Power 0.2 %
Overvoltage categoryIII
Electromagnetic compatibilityImmunity to impulse waves IEC 61000-4-12 Limits for harmonic current emissions IEC 61000-3-2 Conducted and radiated emissions EN 55011 class A Electrostatic discharge immunity testclass III IEC 61000-4-2 Susceptibility to electromagnetic fieldsclass III IEC 61000-4-3 Electrical fast transient/burst immunity testclass III IEC 61000-4-4 1.2/50 µs shock waves immunity testclass III IEC 61000-4-5 Conducted RF disturbancesclass III IEC 61000-4-6 Immunity to impulse wavesclass III IEC 61000-4-8 Immunity to microbreaks and voltage dropsclass III IEC 61000-4-11 Limitation of voltage changes, voltage fluctuations and flicker in low-voltage IEC 61000-3-3
Ambient air temperature for storage-40...185 °F (-40...85 °C)
Ambient air temperature for operation-13...158 °F (-25...70 °C)

Product details

Overview

The PM810RDMG is a Schneider PowerLogic PM800 power meter rated for 600 V with 0.5% accuracy, sampling 128 samples/cycle and measuring harmonics up to the 31st. It communicates via Modbus at 38.4 kbauds and ships with a remote LCD display and 3 m cable. Carrying CE and cULus marks per CSA C22.2 No 14, UL 508, and IEC 61010-1, it is suited for indoor flush-mount panels in North American and European installations.

Selection and integration

Compared to the PM850MG, the PM810RDMG offers the same 600 V rating and Modbus protocol but lacks the PM850MG's expanded I/O and data logging memory. Choose the PM810RDMG when basic power monitoring with harmonic analysis is sufficient and the PM850MG's extra features are not required.

MPN
PM810RDMG