Motor ratings across supply voltages
The SH30552P02A1100 is a three-phase SH3 servo motor delivering 530 W continuous power. Its performance depends on the supply: at 400 V three-phase, nominal speed reaches 6000 rpm with 0.63 Nm torque; at 480 V three-phase, same speed and torque. On single-phase 230 V, speed drops to 4000 rpm with 0.75 Nm; on 115 V single-phase, 2000 rpm at 0.77 Nm. Peak stall torque is 2.5 Nm across the 115-480 V three-phase range, and continuous stall torque sits at 0.71 Nm. The torque constant is 0.59 Nm/A at 120 °C copper temperature, with a back EMF constant of 40 V/krpm at 20 °C.
Encoder and feedback for position loops
This motor carries an absolute multiturn SinCos Hiperface encoder — the feedback type that retains position after power loss, eliminating the need for a homing cycle on restart. The straight connector mates with compatible Schneider drives that support Hiperface protocol.
IP65 and mechanical limits for mounting
Rated IP65 per IEC 60034-5 on both the motor body and shaft bushing, so it handles washdown and airborne particulates in food, packaging, or woodworking lines. The 55 mm flange mounts to international standard patterns; the smooth 9 mm shaft with 20 mm length accepts a keyless coupling or collet.