Motor ratings that drive the selection
The SH30701P0AA4100 delivers 690 W continuous power at 400 V three-phase, with a nominal speed of 3000 rpm. On 480 V three-phase it reaches 7200 rpm, making it a candidate for high-speed spindle or indexing applications where the load profile matches the torque curve. Nominal torque is 1.4 N·m on 230 V single-phase, dropping to 1.1 N·m on 400 V or 480 V three-phase. Peak stall torque hits 3.5 N·m across the 115...480 V three-phase range — this is the figure to size for acceleration and emergency stop loads. Continuous stall torque is 1.25 N·m at 1.8 A continuous stall current. The torque constant of 0.69 N·m/A at 120 °C copper temperature gives a direct relationship between current and torque for closed-loop tuning.
Feedback and connection — what mates where
Encoder type is absolute single-turn Hiperface DSL — a digital serial interface that carries position and temperature data over a single pair, reducing cable count compared to incremental encoders. The rotatable right-angled connector (Quicklock style) allows the cable exit to be oriented on-site without opening the motor housing. Shaft is smooth, 11 mm diameter, 23 mm length — no keyway, so the coupling or pulley must be clamped. The international standard flange (70 mm square, 60 mm centring collar) matches common mounting patterns for frame sizes in this power class.
Environmental sealing and cooling
Cooling is natural convection; no external fan or coolant circuit required.