690 W servo with brake — SH3 frame, 70 mm flange
The SH30701P0BF3100 is a 690 W three-phase servo motor from Schneider Electric's SH3 series, built on a 70 mm flange (2.8 in) with an international standard mounting pattern. It delivers 1.4 N.m nominal torque at 400 V three-phase and 1.1 N.m at 480 V, with a peak stall torque of 3.5 N.m across the 115...480 V range — enough to handle moderate inertial loads and short-duration overloads in positioning axes. The integrated holding brake (3 N.m holding torque) locks the rotor when power is removed, making this motor a natural fit for vertical-axis applications where the load must not drift on power loss.
Absolute multiturn Hiperface DSL — single-cable feedback
Multiturn means the motor remembers its absolute position across power cycles — no homing sequence after a restart, which saves minutes per startup on multi-axis lines.
IP65 rating — washdown-ready, but check the shaft seal
Both the motor body and the shaft bushing carry IP65 per IEC 60034-5, so the motor handles hose-down from any direction — a common requirement on packaging, food, and beverage lines. The smooth shaft has no keyway, which means the coupling or pulley must clamp onto the 11 mm diameter (0.4 in) shaft. No keyway also means no stress riser, but the torque transfer relies entirely on the clamping force of the mating component.
No stock-holding claim; sourced per RFQ through authorized distribution channels.