Speed-power envelope across supply voltages
The SH30702P0AF4000: The nominal speed climbs with line voltage: 3000 rpm at 230 V single-phase, 6000 rpm at 400 V three-phase, and 7200 rpm at 480 V three-phase.
Holding brake and torque capability
Integrated holding brake rated 3 N.m (26.6 lbf.in) static holding torque, with a 7 W pull-in power — the brake releases fully before the motor starts its torque ramp. Continuous stall torque is 2.04 N.m across the 115-480 V three-phase range; peak stall torque reaches 7.6 N.m for short-duration acceleration events. The torque constant is 0.7 N.m/A at 120 °C copper temperature; the stator resistance of 4.2 Ohm and inductance of 10.65 mH define the electrical time constant the drive must handle in its current loop.
Encoder feedback and environmental sealing
Absolute single-turn Hiperface DSL encoder — this is a digital serial interface that carries position data and temperature feedback on a single pair, eliminating separate encoder cable runs. The motor body carries IP65 protection per IEC 60034-5; the shaft bushing without the shaft seal ring drops to IP54, so a shaft seal kit is needed for washdown zones. Natural convection cooling — no external fan, so the continuous torque rating assumes free air circulation around the 70 mm flange. The rotatable right-angle connector with quicklock lets the cable exit orient in the tightest cabinet corner.
Sourcing and lifecycle status
For volume or project pricing, submit an RFQ with your target quantity and delivery window.