Speed and torque across supply voltages
The SH30702P11F2100 delivers 6000 rpm at 400 V three-phase and 7200 rpm at 480 V three-phase — the speed ceiling shifts with the bus voltage, so the application's actual line voltage sets the top speed, not the motor nameplate alone. Nominal torque drops from 2.15 Nm at 115 V single-phase to 1.8 Nm at 400 V three-phase — the torque constant is 0.7 Nm/A at 120 °C copper temperature, meaning the winding temperature rise governs the continuous torque more than the supply voltage does.
Brake and encoder for position-hold applications
The absolute single-turn SinCos Hiperface encoder eliminates the need for a home cycle on power-up — the drive reads the exact shaft position from the encoder's memory, which matters for applications where the machine must resume from the last known position after a power loss.
Environmental sealing and mounting
IP65 on both the motor body and the shaft bushing per IEC 60034-5 — the seal holds against hose-directed water, so the motor can be mounted directly on a washdown station without a secondary cover. The 70 mm flange (2.8 in) with a 2.5 mm centring collar and 5.5 mm mounting holes matches the international standard flange pattern — no adapter plate needed for standard gearbox or machine frame interfaces.