Skip to main content
Log in
Schneider Electric SH30702P12A2100 — Servo Motors with Brake

Schneider Electric SH30702P12A2100 Servo Motor, 70mm Flange

MPNSH30702P12A2100
Active

Schneider Electric SH3 servo motor, SH30702P12A2100, 70 mm flange, three-phase, 6000 rpm at 400 V, 2.15 Nm nominal torque, IP65, absolute multiturn SinCos Hiperface encoder, natural convection cooling.

Schneider Electric SH30702P12A2100 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SH30702P12A2100 — Identification
ParameterValue
Product typeServo motor
Holding brakeWithout
SH30702P12A2100 — Performance
ParameterValue
Nominal torque19.03 lbf.in (2.15 N.m) 115 V single phase 18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase
Nominal output power340 W 115 V single phase 660 W 230 V single phase 1190 W 400 V three phase 1360 W 480 V three phase
Continuous power1130 W
Nominal speed1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase
Maximum mechanical speed8000 rpm
Continuous stall torque18.06 lbf.in (2.04 N.m) 115...480 V three phase
Peak stall torque67.3 lbf.in (7.6 N.m) 115...480 V three phase
Rotor inertia0.41 kg.cm²
SH30702P12A2100 — Electrical
ParameterValue
Rated supply voltage (Us)115...480 V
Network phases3
PhaseThree phase
Maximum current (Irms)11.8 A
Continuous stall current2.9 A
Torque constant0.7 N.m/A 248 °F (120 °C)
Back-EMF constant48 V/krpm 68 °F (20 °C)
Number of motor poles3.0
Stator resistance4.2 Ohm
Stator inductance10.65 mH
Electrical connectionStraight connector
SH30702P12A2100 — Feedback
ParameterValue
Encoder typeAbsolute multiturn SinCos Hiperface
Speed feedback resolution128 periods
SH30702P12A2100 — Mechanical
ParameterValue
Shaft end styleParallel key
Shaft diameter0.4 in (11 mm)
Shaft length0.9 in (23 mm)
Key width0.2 in (4 mm)
Motor flange size2.8 in (70 mm)
Mounting supportInternational standard flange
Length7.4 in (187 mm)
Number of mounting holes4
Mounting-hole diameter0.2 in (5.5 mm)
Mounting-hole bolt circle diameter3.2 in (82 mm)
Centring collar diameter2.4 in (60 mm)
Centring collar depth0.10 in (2.5 mm)
Maximum radial force (Fr)710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Maximum axial force (Fa)80 N
SH30702P12A2100 — Environmental
ParameterValue
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5
Cooling methodNatural convection
Winding (copper hot) temperature266 °F (130 °C)

Product details

Flange size and frame fit

The SH30702P12A2100: The 70 mm flange (2.8 in) mates with the standard international flange pattern — centring collar is 60 mm diameter, 2.5 mm deep. Overall body length is 187 mm (7.4 in), shaft diameter 11 mm with a parallel key and 23 mm shaft length.

Speed and torque across supply voltages

This motor delivers different speed ceilings depending on the supply: 1500 rpm on 115 V single-phase, 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase. Nominal torque at 400/480 V three-phase is 1.8 Nm (15.9 lbf.in); on 115 V single-phase it's 2.15 Nm (19.03 lbf.in). Continuous power hits 1190 W at 400 V three-phase, 1360 W at 480 V three-phase.

Feedback and environmental sealing

Encoder is an absolute multiturn SinCos Hiperface — gives position on power-up without a home cycle. IP65 rating on both the motor body and the shaft bushing per IEC 60034-5, so it handles washdown in food or packaging lines. Cooling is natural convection; no fan to clog or fail.

Frequently asked questions

What is the nominal torque of SH30702P12A2100 at 400 V three-phase?

At 400 V three-phase the nominal torque is 1.8 Nm (15.9 lbf.in). Peak stall torque at the same voltage is 7.6 Nm (67.3 lbf.in).

What IP rating does this motor carry?

IP65 per IEC 60034-5 on both the motor body and the shaft bushing, making it suitable for washdown environments.

How can I order SH30702P12A2100 or get a quote?

Submit an RFQ for current pricing and lead time confirmation.

MPN
SH30702P12A2100