Skip to main content
Log in
Schneider Electric SH30703P01A2200 — Servo Motors with Brake

Schneider Electric SH30703P01A2200 Servo Motor, 1330 W

MPNSH30703P01A2200
Active

Schneider Electric SH3 series servo motor, SH30703P01A2200, 1330 W continuous power, 6000 rpm at 400 V three-phase, absolute single-turn SinCos Hiperface encoder, smooth shaft, IP65/IP67, without holding brake.

Schneider Electric SH30703P01A2200 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SH30703P01A2200 — Identification
ParameterValue
Product typeServo motor
Holding brakeWithout
SH30703P01A2200 — Performance
ParameterValue
Nominal torque26.11 lbf.in (2.95 N.m) 115 V single phase 24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase
Nominal output power460 W 115 V single phase 880 W 230 V single phase 1450 W 400 V three phase 1550 W 480 V three phase
Continuous power1330 W
Nominal speed1500 rpm 115 V single phase 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase
Maximum mechanical speed8000 rpm
Continuous stall torque26.02 lbf.in (2.94 N.m) 115...480 V three phase
Peak stall torque100.01 lbf.in (11.3 N.m) 115...480 V three phase
Rotor inertia0.58 kg.cm²
SH30703P01A2200 — Electrical
ParameterValue
Rated supply voltage (Us)115...480 V
Network phases3
PhaseThree phase
Maximum current (Irms)17.0 A
Continuous stall current4.1 A
Torque constant0.72 N.m/A 248 °F (120 °C)
Back-EMF constant49 V/krpm 68 °F (20 °C)
Number of motor poles3.0
Stator resistance2.7 Ohm
Stator inductance7.3 mH
Electrical connectionStraight connector
SH30703P01A2200 — Feedback
ParameterValue
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution128 periods
SH30703P01A2200 — Mechanical
ParameterValue
Shaft end styleSmooth shaft
Shaft diameter0.6 in (14 mm)
Shaft length1.2 in (30 mm)
Motor flange size2.8 in (70 mm)
Mounting supportInternational standard flange
Length8.7 in (220 mm)
Number of mounting holes4
Mounting-hole diameter0.2 in (5.5 mm)
Mounting-hole bolt circle diameter3.2 in (82 mm)
Centring collar diameter2.4 in (60 mm)
Centring collar depth0.10 in (2.5 mm)
Maximum radial force (Fr)730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Maximum axial force (Fa)80 N
SH30703P01A2200 — Environmental
ParameterValue
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5
Cooling methodNatural convection
Winding (copper hot) temperature266 °F (130 °C)

Product details

1330 W continuous, 6000 rpm at 400 V three-phase

The SH30703P01A2200 is a Schneider Electric SH3 series servo motor rated for 1330 W continuous power. At 400 V three-phase supply it delivers 6000 rpm nominal speed and 2.1 N.m nominal torque; at 480 V three-phase the speed reaches 7200 rpm with the same torque rating. Peak stall torque is 11.3 N.m across the 115...480 V three-phase range, with a continuous stall torque of 2.94 N.m at 4.1 A continuous stall current. The motor's torque constant is 0.72 N.m/A at 120 °C copper temperature.

Absolute single-turn SinCos Hiperface encoder, smooth shaft

The encoder is an absolute single-turn SinCos Hiperface type, providing position feedback without a battery-backed multi-turn count. The shaft end is smooth (no keyway), 14 mm diameter, 30 mm length, with an international standard flange (70 mm flange size, 60 mm centring collar). IP65 protection on the motor and shaft bushing, IP67 on the housing per IEC 60034-5 — suitable for washdown or dusty environments. Cooling is natural convection; no external fan or coolant required.

Frequently asked questions

What is SH30703P01A2200's listed phase and power rating?

The motor is a three-phase design with 1330 W continuous power. Nominal torque and speed vary by supply voltage: 2.95 N.m at 1500 rpm on 115 V single phase, up to 2.1 N.m at 7200 rpm on 480 V three phase.

How can I order SH30703P01A2200 or check availability?

Submit an RFQ for current pricing and lead time; availability is confirmed at quote time through independent distribution channels.

MPN
SH30703P01A2200