Skip to main content
Log in
Schneider Electric SH30703P0BA3000 — Servo Motors with Brake

Schneider Electric SH30703P0BA3000 Servo Motor, 1330 W

MPNSH30703P0BA3000
Obsolete

Schneider Electric SH30703P0BA3000 servo motor, SH3 series, 1330 W continuous power, 3000 rpm nominal speed, absolute multiturn Hiperface DSL encoder, IP65, smooth shaft, 2.8 in (70 mm) flange.

Schneider Electric SH30703P0BA3000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SH30703P0BA3000 — Identification
ParameterValue
Product typeServo motor
Holding brakeWithout
SH30703P0BA3000 — Performance
ParameterValue
Nominal torque24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase
Nominal output power830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase
Continuous power1330 W
Nominal speed3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase
Maximum mechanical speed8000 rpm
Continuous stall torque26.02 lbf.in (2.94 N.m) 115...480 V three phase
Peak stall torque100.01 lbf.in (11.3 N.m) 115...480 V three phase
Rotor inertia0.580 kg.cm²
SH30703P0BA3000 — Electrical
ParameterValue
Rated supply voltage (Us)115...480 V
Network phases3
PhaseThree phase
Maximum current (Irms)17 A
Continuous stall current4.1 A
Torque constant0.72 N.m/A 248 °F (120 °C)
Back-EMF constant49 V/krpm 68 °F (20 °C)
Number of motor poles3
Stator resistance2.7 Ohm
Stator inductance14.6 mH
Electrical connectionRotatable right angled connector
SH30703P0BA3000 — Feedback
ParameterValue
Encoder typeAbsolute multiturn Hiperface DSL
Speed feedback resolution262144 points/turn x 4096 turns
SH30703P0BA3000 — Mechanical
ParameterValue
Shaft end styleSmooth shaft
Shaft diameter0.6 in (14 mm)
Shaft length1.2 in (30 mm)
Motor flange size2.8 in (70 mm)
Mounting supportInternational standard flange
Length8.7 in (220 mm)
Number of mounting holes4
Mounting-hole diameter0.2 in (5.5 mm)
Mounting-hole bolt circle diameter3.2 in (82 mm)
Centring collar diameter2.4 in (60 mm)
Centring collar depth0.10 in (2.5 mm)
Maximum radial force (Fr)1070 N 1000 rpm
Maximum axial force (Fa)160 N
SH30703P0BA3000 — Environmental
ParameterValue
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5
Cooling methodNatural convection
Winding (copper hot) temperature266 °F (130 °C)

Product details

Motor ratings and voltage-dependent performance

The SH30703P0BA3000 is a three-phase servo motor from the SH3 family, delivering 1330 W continuous power at 400 V or 480 V three-phase supply. On 230 V single-phase, nominal output drops to 830 W. Nominal torque is 2.8 N.m at 230 V single-phase, and 2.1 N.m at 400 V or 480 V three-phase. Peak stall torque reaches 11.3 N.m across the 115...480 V three-phase range, with a continuous stall torque of 2.94 N.m. Nominal speed varies with supply: 3000 rpm on 230 V single-phase, 6000 rpm on 400 V three-phase, and 7200 rpm on 480 V three-phase. Maximum mechanical speed is 8000 rpm.

Encoder, feedback, and electrical connections

Fitted with an absolute multiturn Hiperface DSL encoder — a digital serial interface that carries position and temperature data over a single pair, reducing cable count compared to incremental encoder systems. Electrical connection options include a rotatable right-angled connector and a quicklock straight connector, giving flexibility for tight cable routing in the cabinet or on the machine frame. Back EMF constant is 49 V/krpm at 68 °F (20 °C), and the torque constant is 0.72 N.m/A at 248 °F (120 °C) copper temperature. Stator resistance is 2.7 Ohm with 14.6 mH inductance.

Mounting, shaft, and environmental protection

Mounts via an international standard flange, 2.8 in (70 mm) flange size with a 2.4 in (60 mm) centring collar and 0.10 in (2.5 mm) centring collar depth. Four mounting holes at 0.2 in (5.5 mm) diameter. Smooth shaft, 0.6 in (14 mm) diameter, 1.2 in (30 mm) shaft length. No holding brake — this variant is for applications where the load holds position without a brake, or an external brake is used. IP65 protection on the motor body per IEC 60034-5, with IP54 at the shaft bushing when the shaft seal ring is omitted. Natural convection cooling — no external fan or coolant required.

Sourcing and lifecycle — current production, quoted to order

Sourced through authorized distribution channels. No stock-holding claim — each order is confirmed per the buyer's volume and delivery window.

Frequently asked questions

What is the continuous power rating of the SH30703P0BA3000 servo motor?

The SH30703P0BA3000 delivers 1330 W continuous power at 400 V or 480 V three-phase supply. On 230 V single-phase, continuous power is 830 W.

Does the SH30703P0BA3000 include a holding brake?

No — this variant is specified without a holding brake. It is intended for applications where the load holds position mechanically or an external brake is fitted.

What encoder type is fitted on the SH30703P0BA3000?

An absolute multiturn Hiperface DSL encoder. This digital interface communicates position and temperature over a single cable pair, simplifying wiring and reducing feedback cable count.

What is the IP protection rating of the SH30703P0BA3000?

IP65 on the motor body per IEC 60034-5. The shaft bushing is rated IP54 when the shaft seal ring is not used.

MPN
SH30703P0BA3000