1330 W continuous, 6000 rpm at 400 V three-phase
The SH30703P0BA4000: Nominal torque is 18.6 lbf·in (2.1 N·m) at both 400 V and 480 V three-phase; at 230 V single-phase the motor delivers 830 W and 24.8 lbf·in (2.8 N·m) at 3000 rpm. The absolute multiturn Hiperface DSL encoder provides position feedback over a single-cable connection — no separate encoder cable needed, which simplifies wiring in multi-axis machines and reduces cabinet clutter.
Mounting, shaft, and environmental ratings
Mounting uses an international standard flange with a 70 mm (2.8 in) flange size and a 60 mm centring collar; the smooth shaft is 14 mm diameter by 30 mm long, suited for direct coupling to a load without keyway constraints. The motor body carries IP65 protection per IEC 60034-5, with the shaft bushing rated IP54 when the shaft seal ring is omitted — adequate for washdown environments when the mating connector is properly seated. Electrical connection is via a rotatable right-angled quick-lock connector, allowing the cable exit to be oriented in the field to fit tight cabinet layouts.
Electrical and thermal parameters
Continuous stall current is 4.1 A with a peak current of 17.0 A for 3 seconds; the torque constant is 0.72 N·m/A at 120 °C copper temperature, and the back EMF constant is 49 V/krpm at 20 °C.