1900 W continuous, 5.5 N·m nominal torque — voltage-dependent speed
The SH31002P02F1200 delivers 1900 W continuous power and 5.5 N·m nominal torque at 115 V single-phase, stepping to 4.6 N·m at 400 V three-phase. Nominal speed climbs with supply: 1000 rpm at 115 V, 2000 rpm at 230 V, 4000 rpm at 400 V, and 4800 rpm at 480 V. Peak stall torque reaches 18.3 N·m across the 115–480 V three-phase range, with a continuous stall torque of 5.8 N·m. This voltage-dependent speed profile means the motor's rated output changes with the line voltage available — a 400 V three-phase supply unlocks the full 4000 rpm and 1930 W nominal output power. The holding brake holds 9 N·m, well above the nominal torque, so the axis stays locked when power is removed.
Absolute multiturn SinCos Hiperface feedback — no homing cycle needed
The absolute multiturn SinCos Hiperface encoder reports position and speed over a serial-plus-analog interface. Multiturn tracking means the drive knows the absolute position after a power cycle — no homing sequence required on restart. This cuts commissioning time on multi-axis machines and eliminates the crash risk from a lost-home condition.
IP65 motor, IP67 housing — washdown capable, but check the connector
The motor body meets IP65 per IEC 60034-5, the shaft bushing is IP65, and the housing is IP67. This rating covers washdown environments — food processing, packaging, or any line where hosing down the machine is routine. The rotatable right-angle connector and straight connector options let you route the cable away from the spray path, but the IP rating holds only when the connector is fully mated and the cable gland is properly tightened.