Speed and torque across the supply range
The SH31003P11F1200 delivers nominal speeds from 1000 rpm on 115 V single-phase up to 4800 rpm on 480 V three-phase, with nominal torque ranging from 5.1 N.m at 480 V three-phase to 7.5 N.m at 115 V single-phase. Peak stall torque reaches 28.3 N.m across the 115...480 V three-phase range, backed by a holding brake rated at 9 N.m that locks the shaft when power is removed.
Encoder and feedback for position loops
An absolute single-turn SinCos Hiperface encoder provides position feedback without a homing cycle on power-up — the rotor position is known immediately, which cuts commissioning time on multi-axis lines where each axis must reference the same home.
Environmental sealing and mounting
IP65 protection on the motor body and shaft bushing, plus IP67 on the housing, means the SH31003P11F1200 withstands washdown environments — the shaft seal and housing gasket keep coolant and fines out of the winding and bearing cavity. The 100 mm international standard flange with 9 mm mounting holes and a 3.5 mm centring collar depth bolts directly to standard gearbox or machine frames without adapter plates.
Listed as current production — the SH31003P11F1200 is an active catalog item, not a legacy or discontinued part. The straight connector and parallel key shaft end match the standard SH31003P sizing reference.