Multi-voltage servo with holding brake for vertical-axis loads
The SH31401M01F1100 is a Schneider Electric SH3 series servo motor with an integrated holding brake, designed for applications requiring position hold at power-off — think vertical-axis gantries, Z-axis stages, or any load that drifts when the drive drops out. It delivers 1700 W continuous power and 11 Nm nominal torque, with a holding brake rated at 23 Nm — enough to secure a payload without a separate mechanical lock. The motor accepts three-phase supply from 115 V to 480 V, with nominal speed shifting from 375 rpm at 115 V single-phase to 1800 rpm at 480 V three-phase — a single motor that covers global line voltages without a transformer tap change.
Absolute feedback and IP65 sealing for production-floor integration
An absolute single-turn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the controller knows the shaft angle immediately, which cuts commissioning time on multi-axis machines. IP65 protection on both the motor body and shaft bushing means this motor handles washdown environments and airborne particulates common in food processing, packaging, and woodworking lines. The rotatable right-angled connector and straight connector options let the cable exit point be oriented to fit tight enclosure clearances — useful when the motor sits close to a machine frame or guarding.
Sourced through authorized distribution channels; quantities are quoted against the BOM at RFQ time, with volume pricing and lead time confirmed per order.