1700 W continuous, 1500 rpm at 400 V three-phase — SH31401M11F2200
The SH31401M11F2200 is a Schneider Electric SH3 series servo motor with holding brake, rated for 1700 W continuous power. At 400 V three-phase supply it delivers 1500 rpm nominal speed and 10.6 N.m nominal torque; at 480 V three-phase it reaches 1800 rpm and 10.4 N.m. The motor carries an absolute single-turn SinCos Hiperface encoder, giving position feedback without a homing cycle on power-up — a time-saver on multi-axis lines where the controller supports the protocol. Peak stall torque is 27 N.m across the 115...480 V three-phase range, and the holding brake locks 23 N.m — enough to hold a vertical axis load without a counterbalance when the drive is disabled.
Mechanical fit — flange, shaft, and IP rating
Flange size is 140 mm (5.5 in) with a centring collar diameter of 130 mm and depth of 3.5 mm — mounts to the standard IEC 140 mm bolt pattern. The shaft is 24 mm diameter with a parallel key, 50 mm length, and 8 mm key width. IP65 on the motor body and shaft bushing, IP67 on the housing — the motor withstands washdown spray and temporary immersion, suitable for food-processing or outdoor conveyor sections where the cable gland is also sealed. Overall length is 255.5 mm (10.06 in) from the mounting face to the rear of the housing; the rotatable right-angled connector lets the cable exit in four directions, saving space in tight cabinets.