Motor ratings that decide the fit
The SH31401M12F1100: Rated 1700 W continuous power with nominal torque ranging from 10.4 N.m at 480 V three-phase up to 11 N.m at 115 V single-phase — the torque curve shifts with the supply voltage, so the actual load capacity depends on the line voltage at the cabinet. Nominal speed climbs with voltage: 375 rpm on 115 V single-phase, 750 rpm on 230 V single-phase, 1500 rpm on 400 V three-phase, and 1800 rpm on 480 V three-phase. The maximum mechanical speed is 4000 rpm, but the usable range is limited by the available supply. Holding brake torque is 23 N.m (203.6 lbf.in) — sufficient to hold a vertical load on a gantry or Z-axis without power, but the brake is a holding brake, not a dynamic stopping brake; cycle life depends on engaging it at zero speed.
Encoder and feedback — what the absolute multiturn means
Absolute multiturn SinCos Hiperface encoder retains position through power cycles — no homing routine on restart, which matters for applications where the machine must resume from the last known position after a power loss or emergency stop. The Hiperface protocol is a standard interface for Schneider drives (Lexium 32, 28) and many third-party servo drives; confirm the drive's encoder input compatibility before wiring, as the SinCos analog track and Hiperface digital channel require a matched receiver.
Environmental sealing and mounting
IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 — the motor withstands hose-down cleaning and dust ingress, making it suitable for food processing, packaging, or washdown zones. The rotatable right-angle connector and straight connector options let the cable exit adapt to the machine frame. Mounts on an international standard flange with a 140 mm (5.5 in) flange size and a 130 mm centring collar. The 11 mm mounting holes and 3.5 mm centring collar depth match the standard SH3 frame pattern — no adapter plate needed for a Lexium drive package.
No stock-holding claim — the spread is confirmed per inquiry.