Motor ratings that define the load match
The SH31401P11A2100 delivers 2.9 kW continuous power at 400 V three-phase, with a nominal torque of 9.2 N.m at that voltage. At 480 V three-phase the nominal torque drops to 8.4 N.m, but the nominal output power rises to 3.17 kW — the torque-speed trade-off is built into the winding design. Nominal speed varies with the supply: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. That range means the same motor frame covers low-speed high-torque and high-speed applications depending on the drive voltage.
Encoder and feedback — absolute position without a home cycle
Fitted with an absolute single-turn SinCos Hiperface encoder. Single-turn means the absolute position is known within one revolution after power-up — no homing sequence needed on a machine that restarts in the same cycle. The SinCos analog track gives fine interpolation for the servo drive's position loop. The motor is rated IP65 per IEC 60034-5 on both the housing and the shaft bushing — the seal holds up to direct spray and dust ingress, so it can be mounted in washdown zones or dusty environments without a secondary cover.
Sourcing and lifecycle — current production, quoted to order
The lifecycle stage is current — Schneider still lists this as an active part. No successor or cross-reference is recorded, so the SH31401P11A2100 is the direct BOM entry for new builds and spares.