The TM218LDAE40DRPHN is a Modicon M218 logic controller with 20 standard digital inputs plus 4 fast inputs that handle high-speed counting (HSC), and 12 relay outputs plus 4 fast outputs for PTO/PWM/frequency generation. That 40-point on-board count lets you run a small machine or conveyor section without an expansion rack—but if the job grows, it accepts up to 7 expansion modules for a maximum of 248 I/O points. Power supply: 100–240 Vac, 50/60 Hz, with an 85–264 Vac limit that includes ripple. The inrush current hits 30 A at 110 Vac and 60 A at 240 Vac—sized for a C-curve MCB or a slow-blow fuse on the primary side. Continuous output power is 34 W, enough for the internal logic and a small sensor bus; external loads need their own supply. Isolation between the AC supply and the internal logic, I/O, and protective ground (PE) is rated at 1780 Vac / 2500 Vdc—that covers the transient-withstand requirement for industrial control panels per IEC 60947-1.
Lifecycle and sourcing — active production, quoted to order
Schneider Electric lists the TM218LDAE40DRPHN as current production. Typical lead time is 1–10 working days for BOM quantities.