Skip to main content
Log in
Schneider Electric TM3AQ2G

Schneider TM3AQ2G Analog Output Module, 2-Ch, 12-bit

MPNTM3AQ2G
Active

Schneider Modicon TM3 analog output module, 2 channels, 12-bit, current/voltage, CE, IEC 61131-2.

$114.30 – $271.18Ref. price · indicative, final on quote
Schneider Electric TM3AQ2G datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

TM3AQ2G key specifications
ParameterValue
Load typeResistive
Type of cableTwisted shielded pairs cable <98.4 ft (30 m) output
Range of productModicon TM3
Analogue output typeCurrent 4...20 mA Current 0...20 mA Voltage 0...10 V Voltage - 10...10 V
Product or component typeAnalog output module
Typical current consumption40 mA 5 V DC full load 35 mA 5 V DC no load 30 mA 24 V DC no load 70 mA 24 V DC full load
IP degree of protectionIP20
Mounting supportTop hat type TH35-15 rail IEC 60715 Top hat type TH35-7.5 rail IEC 60715 plate or panel with fixing kit
Electrical connection11 x 2.5 mm² removable spring terminal block with pitch 5.08 mm adjustment for outputs and supply
Pollution degree2
Shock resistance15 gn 11 ms
Relative humidity10...95 % without condensation

All specifications

TM3AQ2G additional specifications
ParameterValue
Operating altitude0...6561.68 ft (0...2000 m)
Vibration resistance3.5 mm 5...8.4 Hz) on DIN rail 3 gn 8.4...150 Hz) on DIN rail
Depth2.8 in (70 mm)
Width0.9 in (23.6 mm)
Height3.5 in (90 mm)
StandardsIEC 61131-2
MarkingCE
CategoryUS10MSX22533
LSB value2.44 mV, 0...10 V 4.88 mV, - 10...10 V 4.88 µA, 0...20 mA 3.91 µA, 4...20 mA
Cross talk<= 1 LSB
InsulationBetween output and supply 1500 V AC Between output and internal logic 500 V AC
Non-linearity+/- 0.01 %FS
Output ripple20 mV
Conversion time1 ms + 1 ms per channel + 1 controller cycle time
Repeat accuracy+/- 0.4 %FS
Local signalling1 LED green PWR
Temperature drift+/- 0.006 %FS/°C
Stabilisation time1 ms
Load impedance ohmic1 kOhm voltage 300 Ohm current
Analogue output number2
Absolute accuracy error+/- 0.1 % of full scale at 77 °F (25 °C) +/- 1 % of full scale
Immunity to microbreaks10 ms
Electromagnetic emissionRadiated emissions 40 dBμV/m QP class A 10 m)30...230 MHz IEC 55011 Radiated emissions 47 dBμV/m QP class A 10 m)230...1000 MHz IEC 55011
Analogue input resolution12 bits 11 bits + sign
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation14...131 °F (-10...55 °C) horizontal installation) 14...95 °F (-10...35 °C) vertical installation)

Product details

The Schneider TM3AQ2G is a Modicon TM3 analog output module offering 2 independent channels configurable for voltage (0-10 V, -10-10 V) or current (0-20 mA, 4-20 mA) outputs with 12-bit resolution (11 bits + sign). Insulation between output and supply is 1500 V AC; between output and internal logic 500 V AC. Conversion time is 1 ms plus 1 ms per channel plus one controller cycle; repeat accuracy is ±0.4% FS.

Mounts on TH35-15 or TH35-7.5 DIN rail (IEC 60715) or panel with fixing kit. The removable spring terminal block accepts 2.5 mm² wire, pitch 5.08 mm; use twisted shielded pair up to 30 m for analog outputs. The module draws 40 mA from the 5 V bus at full load and 70 mA from the 24 V bus. IP20, pollution degree 2, vibration 3.5 mm at 5-8.4 Hz and 3 gn at 8.4-150 Hz, shock 15 gn 11 ms. RFQ for lead time.

Frequently asked questions

What is TM3AQ2G's depth and width?

Depth is 2.8 in (70 mm) and width is 0.9 in (23.6 mm). Height is 3.5 in (90 mm).

What compliance documentation does the TM3AQ2G carry?

The module carries CE marking and complies with IEC 61131-2. Additional documentation such as RoHS, REACH, or UL is not listed in the record.

What cable type is recommended for the analog outputs?

Use twisted shielded pairs cable up to 98.4 ft (30 m) for the analog outputs to maintain signal integrity.

MPN
TM3AQ2G