Skip to main content
Log in
Schneider Electric TM5SDO6T

Schneider TM5SDO6T Discrete Output Module, 6 Transistor Sour

MPNTM5SDO6T
Active

Schneider Electric Modicon TM5 series, TM5SDO6T discrete output module, 6 transistor source outputs, 24 V DC, 0.5 A per channel, 12.5 mm width, IP20.

$55.88Ref. price · indicative, final on quote
Schneider Electric TM5SDO6T datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

TM5SDO6T key specifications
ParameterValue
Range of productModicon TM5
Product or component typeDiscrete output module
Maximum voltage drop<2 V at 500 mA sensor supply
Discrete output voltage24 V DC 20.4...28.8 V)transistor
Current per channel0.5 A
Peak output current12 A
Maximum leakage current5 µA 24 V DC when switched off
Typical current consumption36 mA 5 V DC 30 mA 24 V DC
Maximum current per output common3 A
Power dissipation in1.2 W
Switching frequency<= 500 Hz resistive
IP degree of protectionIP20

All specifications

TM5SDO6T additional specifications
ParameterValue
Electrical connection2 wires
Response time<= 300 µs from state 1 to state 0 output
Pollution degree2
Shock resistance15 gn 11 ms
Relative humidity5...95 % without condensation
Operating altitude0...6561.68 ft (0...2000 m)
Vibration resistance1 gn 8.4...150 Hz) on DIN rail 3.5 mm 5...8.4 Hz) on DIN rail
Depth3.0 in (75 mm)
Width0.5 in (12.5 mm)
Height3.9 in (99 mm)
StandardsUL 508 CSA C22.2 No 213 IEC 61131-2 CSA C22.2 No 142
MarkingCE
CategoryUS1PC1222532
Local signalling1 LED (green) for power supply 1 LED (red) for power supply 6 LEDs (yellow) for output status
Discrete output logicSource
Discrete output number6 transistor at 24 V DC
Electromagnetic compatibilityElectrostatic discharge immunity test, 4 kV on contact IEC 61000-4-2 Electrostatic discharge immunity test, 8 kV in air IEC 61000-4-2 Susceptibility to electromagnetic fields, 1 V/m 2...2.7 GHz IEC 61000-4-3 Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz IEC 61000-4-3 Electrical fast transient/burst immunity test, 1 kV I/O IEC 61000-4-4 Electrical fast transient/burst immunity test, 1 kV shielded cable IEC 61000-4-4 Electrical fast transient/burst immunity test, 2 kV power lines IEC 61000-4-4 1.2/50 µs shock waves immunity test, 0.5 kV differential mode IEC 61000-4-5 1.2/50 µs shock waves immunity test, 1 kV common mode IEC 61000-4-5 Conducted RF disturbances IEC 61000-4-6 Conducted and radiated emissions CISPR 11
Ambient air temperature for storage-40...158 °F (-40...70 °C)
Ambient air temperature for operation14...131 °F (-10...55 °C) without derating horizontal installation) 14...140 °F (-10...60 °C) with derating factor horizontal installation) 14...122 °F (-10...50 °C) vertical installation)

Product details

TM5SDO6T integrator overview

The TM5SDO6T is a 6-point source transistor output module for the Modicon TM5 remote I/O family. It switches 24 V DC loads up to 0.5 A per channel, with a total common limit of 3 A. The narrow 12.5 mm width packs six outputs into minimal DIN rail space, and the 1.2 W dissipation keeps cabinet thermal rise low. Response time from state 1 to 0 is ≤300 µs, and the module can switch resistive loads up to 500 Hz. Peak output current of 12 A is supported briefly. Outputs are source (sourcing current) — compatible with standard 24 V DC sensors and small actuators. The module is CE marked, UL 508 listed, CSA C22.2 No 213, and IEC 61131-2 compliant. EMC immunity covers electrostatic discharge, fast transients, surges, and radiated fields per the evidence set.

It fits the Modicon TM5 backplane profile (3.0 in / 75 mm depth, 3.9 in / 99 mm height) and uses a 2-wire electrical connection. No forced-air cooling required at 1.2 W dissipation.

Frequently asked questions

What are the key ratings of the TM5SDO6T?

6 source transistor outputs, 24 V DC (20.4 to 28.8 V), 0.5 A per channel, 3 A per common, peak output 12 A, switching frequency ≤500 Hz resistive, response time ≤300 µs from state 1 to 0.

What compliance standards does the TM5SDO6T meet?

It carries CE marking, UL 508, CSA C22.2 No 213, IEC 61131-2, and EMC immunity to IEC 61000-4-2/3/4/5/6 and CISPR 11.

MPN
TM5SDO6T