What this filter does for your ATV610 line
The VW3A46114A is a passive filter matched to the ATV610 variable speed drive, sized for a 110 kW / 149 hp motor. It pulls the input current THDI down to 10 % — that's the harmonic distortion limit that keeps you clear of IEEE 519 nuisance trips and transformer overheating on a shared bus. One filter per drive, no sharing. Rated for 380...480 V three-phase, 50 Hz ±2 %, with an input current rating of 164 A and output rating of 232 A. Efficiency sits at 98 %, so the 790 W thermal loss is what your enclosure ventilation needs to handle. IP20 — mount it inside a clean panel, not on the washdown floor.
Line and load terminals are clearly marked, L2, L3 and ', L2', L3' — accept 50...95 mm² cable. The D1, D2, D3, D1', D2', D3' terminals take 25 mm² for the DC choke or braking resistor connections. TS and TS' terminals are 0.5...4 mm² for the thermal switch or precharge control. Strip and torque per the label; no special tools beyond a standard crimper.