The VW3AP0707 is a connection enclosure for the Altivar Process ATV600 and ATV900 compact drive systems, covering the 110 to 315 kW power range. It comes as a pre-assembled unit with one connection enclosure, power terminals, and a main switch — designed for bottom cable entry. This is a cabling accessory, not a standalone drive component. The manufacturer specifies it cannot be ordered alone — it only ships in combination with a standard enclosure. That means your BOM line needs the drive system first, then this as the matched cable-entry box.
Because this part ships only as a bundle with the standard enclosure, sourcing it independently requires quoting the full assembly.
Bottom cable entry — what it means on site
Bottom cable entry means the power and control cables enter the enclosure from underneath, not through the top or side. This is the typical arrangement for floor-standing drive cabinets where cables run in a cable trench or through the cabinet baseplate — saves a gland plate swap if your installation already routes cables from below. The enclosure integrates with the Altivar Process ATV600 and ATV900 compact drive systems. If your panel layout has the drive mounted above the connection box, the bottom-entry cable path keeps the wiring straight and avoids sharp bends that can stress cable terminations over time.