The VW3E1147R060 is a hybrid cable from the PacDrive 3 range, purpose-built for connecting a Lexium 62 ILM servo drive to the D0 distribution box. It carries both power and feedback on a single shielded jacket — 6 m (19.7 ft) of that cable, terminated with a straight RJ45 D20 connector at the drive end. The shield is continuous through the connector body, so you get a clean ground reference back to the distribution box without a separate drain wire.
Routed through a cable gland or drag chain, the 6 m length gives enough slack for a standard cabinet-to-machine transition without a junction box. The RJ45 D20 connector latches into the drive's hybrid port — no separate power and encoder cables to manage. Keep the shield bond continuous through the connector; a floating shield at the drive end invites noise coupling from adjacent VFD output cables.
Listed as active in production. No end-of-life notice or successor announced. For a BOM line using the Lexium 62 ILM family, this cable is the current standard interconnect — no substitution needed.