The VW3E1148R090 is a hybrid shielded motor cable from the PacDrive 3 range, purpose-built to connect a Lexium 62 ILM distribution box (D1) to either another distribution box or to ILM integrated drives (D2). The 29.5 ft (9 m) length covers typical machine spans between drive nodes on a multi-axis line. It carries both power and feedback conductors in one shielded jacket — that's the 'hybrid' description — which cuts the cable count between the distribution box and the integrated drive. The D1 and D2 elbowed connectors keep the cable routed tight against the machine frame, reducing snag risk on a moving gantry or conveyor.
The 9 m (29.5 ft) length is the key fit parameter: it determines the maximum separation between the distribution box and the farthest drive on a daisy-chain segment. Going longer than 9 m on a single segment risks voltage drop on the DC bus and signal degradation on the feedback pair — this cable is sized for that distance, not beyond it. The shielded construction (Type of Cable: Shielded motor cable) is not optional on a servo drive installation — the shield contains both the motor-power PWM noise and protects the encoder feedback from coupled interference. Without it, you get position drift and drive faults on long runs. The D1/D2 elbowed connectors are specific to the Lexium 62 ILM ecosystem. A straight connector would not clear the drive housing on a tightly packed multi-axis panel — the 90° exit is what makes this cable fit in a standard cabinet layout.